SPECIAL SESSIONS

时间

题目

作者

14:00-14:10

Investigation on the effect of the impeller blade geometry on the unstable flow characteristics in a centrifugal pump

Weixiang Ye, Xudong Wang, Qiang Bi, Baotang Zhuang, Xianwu Luo

14:10-14:20

一种具有温度补偿的高精度热式气体微流量传感器

付新菊，李永，关威，高晨光，汪旭东，刘清源

14:20-14:30

Simulation study on stress relaxation response of Polycrystalline γ-TiAl Alloy under Nano-indentation

Junye Li, Ziqiang Zhang, Guangfeng Shi, Lei Zhang, Xiwei Dong and Xinming Zhang

14:30-14:40

Research on the influence of single crystal germanium cutting parameters based on molecular dynamics

Zixian Zheng, Junye Li, Lixiong Wang, Jingfeng Fan, Jianhe Liu, Weihong Zhao

14:40-14:50

大环径比O形金属橡胶密封件结构性能研究

任志英，吴丁丁，史林炜，张兆想，谭桂斌，黄兴

14:50-15:00

锥射流过程中射束电流的建模与数值模拟研究

索晓晨，张 开，黄潇博，汪 典，贾宏宇，杨 帆，张文生，李佳慧，宋培义

15:00-15:10

Development and Application of Multi-station Online Automatic Assembly Platform for Electric Valves in Space PropulsionSystem

ZANG Xiaohua, ZENG Zhaoqi, PAN Mingqiang, CAI Kun, WEI Yanmin

15:10-15:20

Rapid Calibration of Nanoliter Per Second Flow Rate by Image Processing Technology

Jiawei Luo, Cheng Yang, and Yan Shen

15:20-15:30

一种航天器微纳流体供给系统设计

张超群，陈磊，张泉，刘瑞，郭敏，袁雨辰

15:30-15:40

柔性相变除冰相变片驱动能力研究

田昊，伊甜甜，弓永军

15:40-15:50

DSMC simulation of the effect of needle valve structures on the rarefied flow of cold gas thrusters

Lu Songcai, Liu Xuhui, Wang Xudong, Li Yong, Yu Yusong, Zhang Shurui

15:50-16:00

Influence of High Viscosity on the Washout Resistance of Magnetic Fluid

Zixian Li, Decai Li, Yanwen Li and Shuntao Han

时间

题目

作者

14:00-14:10

A Piezoelectric Wave Energy Converter with Phase Control

Xiaoyun Chen, Chunrong Liu

14:10-14:20

非线性消波俘能结构及其性能分析

李鹏程，张海成，刘春嵘，金华清，徐道临

14:20-14:30

Effects of wave group modulation on sand concentration in the surf zone

Yang Zhang, Zhili Zou

14:30-14:40

线性长波越过水下环礁引起的Bragg共振研究

傅丹娟，毛豪东，张振伟

14:40-14:50

波浪作用下柔性压电膜结构的非线性响应

杨闻宇，刘春嵘

14:50-15:00

Study on Human Motion Energy Harvesting Device: A Review

Yuchen Wei, Xupeng Wang, Kangjia Zhai, Bing Han, Dianbiao Dong

15:00-15:10

船载 双稳态 能量 捕获装置 设计及性能分析

黄宇航，毕仁贵，周潇，李鹏程，张海成

15:10-15:20

Design and Energy Analysis of Flywheel-Based Boom Energy Regeneration System for Hydraulic Excavators

Jiansong Li, Shaohui Li and Zhi Ji

15:20-15:30

Wave power extraction analysis for a dual-chamber
oscillating water column device with a gap

Deng Zhengzhi, Bao Jintao, Ye Yangsha

15:30-15:40

复合型振荡水柱式波能转换装置的水动力特性研究

邓争志，李梦瑶

15:40-15:50

集成于斜坡型防波堤的振荡水柱波能转换装置水动力特性研究

邓争志，李梦瑶

15:50-16:00

一种基于拉簧实现的新型自适应双稳态波浪能转换器

周佳欣，张海成，卢一铭，徐道临

时间

题目

作者

14:00-14:09

Effect of bi-directional head on dynamic water resistance moment of herringbone gate operation

Guolai Yang, Chuanchuan Cao, Guoguo Wu, and Wei Ma

14:09-14:18

基于 AMESim 的新型变排量机油泵建模与仿真研究

张 伟，翟翼飞

14:18-14:27

Research on Electro-hydraulic Composite Drive Winch and Energy Recovery System for Mobile Crane

XiangGen Xu, TianLiang Lin, HaoLing Ren, Tong Guo, Zhongshen Li, Cheng Miao

14:27-14:36

泵站虹吸式出水流道多参数优化

李志祥，徐辉，陈会向，冯建刚，阚阚

14:36-14:45

基于动态接触角模型的液滴撞击过冷壁面数值研究

李英杰，陈 川，李 强，张 瑜，石拓

14:45-14:54

电磁铁线圈构型对高速开关阀动态特性影响规律研究

徐纯洁，谢方伟，凡镕瑞，魏汝路，田祖织

14:54-15:03

蒸发循环泵泵轴性能的仿真分析

马荣柯，刘小振，李伯巍，傅波，李宇

15:03-15:12

波纹管内水流动阻力系数分析与优化研究

袁晓明，徐新宇，刘存飞，张立杰

15:12-15:21

Numerical Characteristics of Hydraulic Pressure in High-Speed Switch Valve for Brake Systems

Caihu Zhao, Yu Chen, Tianlong Zhu, Baolin Sun, Jin Zhang

15:21-15:30

Research on the Non-Uniform Contact Characteristics and Thermal Behavior of Friction pairs involving the Radial Conical Buckling Deformation in Hydro-Viscous Drive

Hongwei Cui, Yiran Suo, Bizhou Mei, Donghui Li, Yuyu Jiang, Hao Sun, Lingqing Zhang

15:30-15:39

新型高转速柱塞泵转速变化压力特性研究

王羽熙，徐立鑫，尹大禹，李正贵，司国雷

15:39-15:48

非球形溃灭的空泡动力学数值研究

资丹，孙钰荣，吕品，姚志峰，王福军

15:48-15:57

Investigation on the Flow Characteristics and Working Performance of Micro-Newton thruster based on DSMC Method

WANG Xu-dong, LI Yong, Gao Yong, LI Hongmeng, Liu Xuhui, Guo Tangsong, Li Fei

15:57-16:06

基于 AMESim 的换挡缓冲阀油压特性优化研究

刘毅，胡俊峰，张啟晖，郭泽波

时间

题目

作者

14:00-14:08

伺服机构气动加载装置及零位保压测试方法研究

余三成，董文勇，李 勇，纪宝亮，李文顶

14:08-14:16

直线 — 旋转复合运动 新型 气动执行器线性自抗扰控制研究

钱鹏飞，徐元曈，浦晨玮，刘磊，冯志远，唐修文

14:16-14:24

Robust Active Disturbance Rejection Control for Modular Fluidic Soft Actuators

Tao Wang

14:24-14:32

货架下方可通行无人仓中多AGV系统的路径规划

杨洪玖，赵国威，李洪波，程富阳

14:32-14:40

基于改进 Sine 混沌映射的新型粒子群优化算法

刘磊，姜博文，周恒扬，吕盘松，浦晨玮，钱鹏飞

14:40-14:48

Analysis and design for intelligent manufacturing cloud control systems with cloud containers

Ce Yan, Yuanqing Xia, Hongjiu Yang, Yufeng Zhan

14:48-14:56

基于 Retinex-DIP 算法的低照度多视图三维重建优化

韩静昌，黄丽敏，赵英宝，武晓晶

14:56-15:04

Prescribed performance control for a pneumatic cylinder with strong friction via nonlinear extended state observer

Shaomeng Gu, Ce Yan, Xin Liu, Ling Zhao

15:04-15:12

Fault-tolerant scheduling with attentive neural CDE predicting for industrial IoT workflows in cloud-edge environment

Ce Yan, Yuanqing Xia, Hongjiu Yang and Ling Zhao

15:12-15:20

Dynamic Event-Triggered Tracking Control for Networked Pneumatic Muscle Actuators System with Dead-zone

Li Li, Qi Zhou, Chao Liu, Yipeng Cao, Ling Zhao

15:20-15:28

3-PSS气动高速并联机器人自抗扰控制研究

赵苓，蔡舰洋，许立昕，曹鑫悦

15:28-15:36

Global anomaly detection-based distributed estimation for constrained systems over sensor networks

Xiaohui Hao, Yang Xu, and Ling Zhao

16:00-16:08

Symplectic geometry reconstruction method based on efficiency factor weighting and its application in early fault diagnosis of hydraulic pump

Siyuan Liu, Yongqiang Zhang, Chao Ai, Jixiong Yin, Wanlu Jiang

15:36-15:44

复合控制算法在微流控芯片气压驱动中的应用

刘旭玲，薄乐，刘威，左文思，金少搏，李松晶

15:44-15:52

基于长短时记忆神经网络算法的空气污染预测建模

周宁，刘朝阳，李铁军，郝崇清，池鹏飞，傅高铎

15:52-16:00

基于 Granger 因果关系的磁刺激涌泉穴对工作记忆的脑效应网络构建与分析

王瑶 郭磊，徐桂芝，屈若为，周宁

时间

题目

作者

14:00-14:10

Technical analysis of servo Actuator energy Power system for Launch Vehicle
（运载火箭伺服作动器能源动力系统技术分析 ）

李文顶，余三成，董文勇，纪宝亮，傅俊勇

14:10-14:20

差动式行星滚柱丝杠副的运动特性与动力学分析

乔冠，张校民，刘付乐，郭世杰，马尚君

14:20-14:30

轴承环式行星滚柱丝杠副的运动原理与接触力分析

乔冠，朱均达，卢哲龙，张楠，马尚君

14:30-14:40

航空发动机压气机转子螺母拧紧装配工艺优化

付玄，杜航，谭天，傅波

14:40-14:50

考虑齿轮副啮合激励的滚柱螺纹动载荷分布

许千斤，马尚君，牛茂东，马腾龙

14:50-15:00

全断面竖井掘进机锥形刀盘破岩机理与构型设计研究

王帅，刘鹏远，李阁强，董振乐，李东林，韩伟峰，焦雷

15:00-15:10

基于 ADAMS 的全断面竖井掘进机锥形刀盘载荷特性研究

王帅，郭庚鑫，李阁强，董振乐，李东林，韩伟峰，焦雷

15:10-15:20

考虑多因素的舵机传动系统动力学联合仿真建模及实验研究

万琦，刘更，马尚君

15:20-15:30

行星滚柱丝杠螺纹副-齿轮副同步啮合动态滑动特性

张建新，马尚君，邓文竹，马腾龙，刘 更

15:30-15:40

High Torque Density Electro-Mechanical Actuators Design for Aerospace

Xiaoshuai Liu, Liang Yan, Pengjie Xiang, Xinghua He, Nannan Du

15:40-15:50

Structural design and performance analysis of 3D braided two-stage reducer box

Wang Xupeng, Zhang Weiliang, Tang Xinyao, Ji Xiaomin, Liu Fengfeng, Liu Shuwei, Liu Mingjun

15:50-16:00

高精度数控立式车床车削刀架设计

张文武，宋宇宁，徐广晨，钱琳

时间

题目

作者

16:30-16:40

Effects of Pump Parameters on the Oil
Absorption Characteristics of Bidirectional
Involute Internal Gear Pumps

Yantao Zhang, , Zongbin Chen, and Jian Liao

16:40-16:50

Identification and Compensation of Nonlinear Friction in electromechanical hydraulic system for excavators（挖掘机电液系统非线性摩擦的辨识与补偿 ）

杨超，赵佳伟，马伟，殷晨波，杨中良，王大宇

16:50-17:00

低速大转矩液压马达空载排量的测定方法研究

郑智剑，王洋定，钱咪，贺梁

17:00-17:10

低速大扭矩液压马达配流机构研究

于鸣泉，赵继云，满家祥 王云飞

17:10-17:20

弹性变形对内曲线径向柱塞马达流量脉动的影响

安高成，高凯，呼振华，董洪全，刘宝玉，宋伟

17:20-17:30

低速马达有无零速幅角导轨曲线特性分析

安高成，王文康，宋伟，董洪全，刘宝玉，呼振华

17:30-17:40

内曲线径向柱塞马达低分配系数下曲线设计与分析

安高成，呼振华，高凯，董洪全，刘宝玉，王文康

17:40-17:50

内曲线液压马达低应力三层复合轴瓦厚度分配

李莹，王博众，何双，刘彦东，张晋

17:50-18:00

内曲线马达曲线导轨表面热处理工艺优化

师文广，张红娟，杨亚森，张晋，高进，李莹

18:00-18:10

基于 Matlab GUI 的内曲线径向马达定子曲线设计

安高成，宋伟，王文康，董洪全，刘宝玉

18:10-18:20

内曲线液压马达柱塞表面处理研究

张红娟，崔雪石，应宏，李莹，李成志，尚小明

18:20-18:30

Research on Airworthiness in Civil Transport Category Rotorcraft Hydraulic Systems（民用运输类旋翼航空器液压系统适航技术研究）

谷峰，董今朝，徐海，张卓然，宋彦南，刘彬彬，王洪志，鞠洪福

时间

题目

作者

16:30-16:42

电磁铁传热特性及散热优化的数值模拟研究

李英杰，陈 川，张 瑜，李 强，司国雷，宋鹏

16:42-16:54

Isogeometric boundary element method to analyze two-dimensional heat transfer problems

Jiaxing Chen, Jiawei Xiang

16:54-17:06

玄云 SW120B 航空发动机尾流热流场数值分析

龚 淼，黄 文，马存原

17:06-17:18

轴径向桨搅拌槽内层流混合过程的数值模拟

罗耀东，高殿荣，郝亚婷，毛璐凯

17:18-17:30

Finite Element Analysis on Thermoelastic Instability of Multi-Disc Clutches Involving Deformation Modes of Multi-layer Material Friction Disc

Yiran Suo, Hongwei Cui, Bizhou Mei, Donghui Li, Lingqing Zhang

17:30-17:42

Analysis of the Output Torque of a Torque Motor in a High-temperature Environment

Mingqian Xu, Zhang Jian, Li Jiayang, Zhang Tao, YuHang Wang

17:42-17:54

Simulation Analysis of the Effect of Slit/Slots Geometry on Spray Development of Bipropellant Pintle Injector

Cai Kun, Zhen Zhang, Fengshan Wang, Yu Hu, Xudong Wang, Zhicheng Fang, Xiaofang Mao, Zhaopu Yao, Yusong Yu

17:54-18:06

烟叶加料过程的热质传递特性分析

邵禹，袁锐波，陈 坤，施 涛，李 想，胡启明

18:06-18:18

Analysis of thermal-mechanical-hydraulic coordination mechanism of constrained piston hydraulic engine

Xin Bai, Liqun Lu, Tiezhu Zhang, Xiaoping Ouyang, Yi Wang

18:18-18:30

高温油液作用下比例伺服阀的流固热耦合分析

董安锐，李建伟，魏立忠，陈继业，陈俊远，李侃，张小洁

时间

题目

作者

16:30-16:43

夹持方式对超薄石英玻璃抛光面形精度的影响

赵天晨，李敏，丁骏恺

16:43-16:56

Improved rod seal numerical method and model with thermal contact to reveal mixed lubrication mechanism

Tuyuan Yin, Dasheng Wei, Tingmei Wang, Jian Fu

16:56-17:09

Effect of segment start-up mode on the stability of mixed-flow pump

Zhenbo Tang, Guojun Zhu, Yifan Xuan, Jianjun Feng

17:09-17:22

Magnetic fluid sealing status estimation based on acoustic emission monitoring

Nuo Chen, Decai Li, Jinyu Xue, Yuan Yin, Yanwen Li

17:22-17:35

Study on Internal Surface Finishing of Double-Layer Fuel Nozzle

LI Qikai, QIN Pu, Zhang Yirui, GUO Jiang

17:35-17:48

斜齿齿轮流量计多目标优化设计方法

郝宁，王林涛，朱沣樟，刘子康，王雪

17:48-18:01

Fault Diagnosis of Hydraulic System Based on D-S Evidence Theory and SVM

Lintao Wang, Hang Yin

18:01-18:14

A Grasping Strategy for Flight Manipulators Combining Finite State Machines with Structured Light Cameras

Pu Dingcheng, and Dun Xiangming

18:14-18:27

随机载荷作用下不同曲率液压管路的疲劳寿命分析

孔洁

时间

题目

作者

16:30-16:43

Molecular dynamics simulation study on the influence of fluid medium and impact direction on cutting iron-carbon alloy

Jun-ye LI, Zhen-guo ZHAO , Jun-wei Li, Fu-jun Xiao , Rong-xian Qiu, Hong-si Xie, Wen-qing Meng

16:43-16:56

A Novel Multi-fields Assisted Abrasive Scouring Polishing Method for Puncture Needle

QIN Pu, GUO Jiang, LI Qikai, ZHANG Min

16:56-17:09

Influence of Structural Deformation of Flow Distribution Pair on Lubrication Characteristics in Deep Sea Environment

CAO Xue-peng (曹学鹏), LI Cai-hong (李彩红), WANG Kai-li (王凯丽), Zhang Zheng (张正)

17:09-17:22

环形海尔贝克磁场增强的轮式磁流变钛合金曲面抛光方法研究

冯铭，李敏

17:22-17:35

Molecular dynamics simulation study on nanoindentation response of polycrystalline γ-TiAl alloy

Junye Li, Shengqiang Yang, Guangfeng Shi, Jingran Zhang, Xiwei Dong, Xinming Zhang

17:35-17:48

Simulation and Validation of Cavitating Flow in a Torque Converter with Scale-Resolving Methods

Jiahua Zhang, Shiqi Liu, Cheng Liu, Qingdong Yan, Meng Guo, and Wei Wei

17:48-18:01

Measurement and analysis of polishing forces during magnetorheological shear thickening polishing

Cheng Qian, Yebing Tian, Zhen Ma, Shadab Ahmad, Zenghua Fan

18:01-18:14

飞机除冰冲击射流多相流耦合模型研究

龚 淼，申远航

18:14-18:27

The generated surface characteristics of micro-channels on Ti-6Al 4V by ultrasonic vibration-assisted grinding

Jing Zhao, Quanli Zhang, Yinwu Zhang, Zhaoqi Zeng, Yan Chen

时间

题目

作者

16:30-16:47

Experimental study on draft tube of a model kaplan turbine

Lianchen Xu, Kan Kan, Yuan Zheng, and Demin Liu

16:47-18:04

Large Eddy Simulation of Wake Properties of a Marine Propeller Using an Immersed Boundary Method

Haoyu Li, Kan Kan

17:04-17:21

Investigation on load distribution and two-phase flow characteristics of deep-sea oil and gas mixed transport pump

Li Chenhao, Luo Xingqi, Zhu Guojun, Feng Jianjun, and Wang Like

17:21-17:38

高比转速轴流泵参数化设计与优化

胡言馨，阚阚，陈会向，刘卫东

17:38-17:55

Performance of Water Lubricated Thrust Bearing for High Speed Submersible Pump

BAI Yuxing, WU Jiajia, WANG Tao, CAO Puyu, ZANG Liguo

17:55-18:12

Flow instability of axial flow pump as turbine using streamlinecoordinates

Qingying Zhang, Kan Kan, Yuan Zheng, Haoyu Li

18:12-18:29

Intelligent Optimization of Axial-flow Pump Using Physics-informed Machine Learning

Jie Zhou, Kan Kan, Huixiang Chen, Yuan Cheng